ECOLAB EcoAdd Betriebsanleitung Seite 316

Control/software
[Set Batch] - [ Batch concentration]
Fig. 61: Batch - [Initial batch]
1.
[Call the main menu]:
2.
[Select Configuration]:
3.
Use the scrollbar to go to the [Batch ] menu item.
4.
[Select Batch].
ð Screen switches to the [Batch]
5.
'Select Batch concentration' .
ð The 'Batch concentration' option field is selected.
6.
[ Press the Next button]
ð The screen changes to the setting: 'Batch concentration' / 'Water quantity' .
7.
Use the slider to enter the quantity in litres.
8.
[ Press the Next button]
ð The screen changes to the setting: 'Batch concentration' / 'Concentration' .
9.
Use the slider to enter the concentration in percent (%).
10.
'Select the concentration after the decimal point' .
11. Use the slider to enter the concentration in percent (%) (after the decimal point).
12. [ Press the Next button]
ð The screen changes to the setting: 'Batch concentration' / 'Dosing time' .
13. Use the slider to enter the dosing time in minutes.
14. Press the
ð The setting is saved, and the screen switches back to the batch overview.
15. Press the
16. Press the
17. Press the
MAN046939 Rev. 6-10.2021
4
3
10
9
Ä Chapter 8.5 'Main menu' on page 63
Ä Chapter 8.8 'Configuration' on page 89
.
.
.
button.
button to return to the [Configuration] menu.
button to return to the [Main menu].
button to return to the [Operating display].
6
5
12
11
112
8
7
14
13