ECOLAB EcoAdd Betriebsanleitung Seite 324

Control/software
Installing the degassing valve on the EcoAdd
Personnel:
Protective equipment:
3
1
4
2
Degas EcoAdd
1
EcoAdd pump
2
Metering line connection
3
Return connection
4
1.
Mount the degassing valve
2.
Connect the metering line on the pressure valve of the degassing valve
3.
Connect the return line to the return connection
agent tank.
4.
Connect the degassing valve connection plug with flat seal
and screw into place.
5
5.
Connect the pump connection cable
degassing cable to the pump' on page 121 ).
6.
Connect the mains plug of the diaphragm metering pump to the power supply.
MAN046939 Rev. 6-10.2021
n Specialist
n Service personnel
n Protective gloves
n Protective eyewear
n Safety shoes
5
6
7
on the pressure valve of the pump.
1
CAUTION!
Make sure that the plug of the connection cable
respective seal and screwed tight! Due to a "coding" of the plug, it can
only be mounted in one position.
Solenoid valve
5
Connector for connector cable with screw connection
6
Degas connection cable to the pump
7
and lead it back into the dosing
4
to the pump PCB (see
7
120
is mounted with the
7
.
3
to the solenoid valve
6
Ä 'Connecting the