ECOLAB EcoAdd Betriebsanleitung Seite 353

10.3 Changing the container - Empty signal
Personnel:
Protective equipment:
Important safety instructions for changing the container.
DANGER!
You must observe all safety instructions provided below to avoid injury
to personnel.
Prevent unauthorised persons from accessing the containers and train your
personnel on how to handle the dosing chemical used.
Chemical hazards (dosing medium/active substance)
DANGER!
Risk of injury to the skin and eyes caused by the chemical used
(metering medium).
– Read the enclosed safety data sheet carefully before using the metering
medium.
– The safety regulations and the required protective clothing when working
with chemicals must be complied with.
– Attention must be paid to the information included on the product data
sheet for the metering medium used.
DANGER!
It is essential that that hands are washed prior to work breaks and at the end
of the working day. Information about the usual precautions when handling
chemicals and about the use of PPE can be found on the relevant safety data
sheet for the chemical being used and must be complied with.
ENVIRONMENT!
Leaked, spilled dosing media can harm the environment.
Leaked, spilled dosing media must be cleaned and disposed of correctly,
according to the instructions on the product data sheet. It is essential to ensure
that the required personal protective equipment is used.
Preventive action:
Place product containers in a tank to collect leaking fluids without harming the
environment.
Safety data sheets
The safety data sheet is intended for the users so that they can take any steps necessary
for safeguarding their health and safety at work.
n Operator
n Specialist
n Chemical-resistant protective gloves
n Protective eyewear
n Safety shoes
149
Operation
MAN046939 Rev. 6-10.2021