ECOLAB EcoAdd Betriebsanleitung Seite 318

Control/software
8.8.14 Oval gear meter
Test the connection of the oval gear meter:
To detect the OGM
connection to the pump and re-connected so that the pump re-initialises itself.
In the Pump menu, the oval gear meter function is automatically enabled under
Configuration and the metering controller and metering monitoring functions
can now be selected.
MAN046939 Rev. 6-10.2021
If oval gear meter is connected to the pump for metering control (depending
on the setting in the submenu items), you can select the way in which the
incoming pulses are processed.
PLUS
To assemble the OGM , disconnect the power supply and connect it to the
terminals 10-13 as shown in
PLUS
OGM ' on page 52 .
To check that an appropriate oval gear meter (type (OGM
connected to the metering pump, the operating screen displays the
symbol for the oval gear meter (OGM
software detects this.
PLUS
, the supply voltage must be disconnected after
114
Ä '[Flow] Dosing monitoring - oval gear meter
PLUS = oval gear meter) once the
PLUS ) is