ECOLAB EcoAdd Betriebsanleitung Seite 239

Setting the application concentration in the 'Operating level'
Fig. 5: Setting the application concentration
1.
Press the pulse value displayed in the 'Operating level' for around 2 seconds.
ð The 'Application conc.' screen is displayed.
ð You can set the percentage application concentration and the number to the left
of the decimal point is already selected for setting.
2.
Enter '00' to the left of the decimal point for 'Application conc.'
3.
Enter '100' to the right of the decimal point for 'Application conc.'
4.
[Press the Next] button
5.
[Press the Back ] button.
.
35
Application example:
MAN046939 Rev. 6-10.2021