ECOLAB EcoAdd Betriebsanleitung Seite 349

[Setting Operating mode] [Pulse] [Concentration] [%] or [ppm]
[Setting %]
1
Fig. 82: [Changing the Pulse] [Concentration] [%] at the operating level
1.
On the screen, press the displayed [Concentration] [%] for approx. 2 seconds.
2.
This step can be skipped if there is no password query here.
If you have activated the [access code]
Ä Chapter 8.5 'Main menu' on page 63 .
We strongly recommend setting the access code!
Ä Chapter 8.8.4 'Access code' on page 93
ð The screen switches to the view for setting the [%] value.
ð The number to the left of the decimal point is already set and can be changed.
3.
[Use the slider to set the %] value to the left of the decimal point.
4.
Select the field for entering the value after the decimal point.
ð The background field colour changes to dark blue, which indicates that the field is
ready for input.
5.
[Use the slider to set the %] value after the decimal point.
6.
[Press the Menu button]
ð The settings are saved and the pump switches back to the operating screen.
The new 'Application concentration ' is displayed on the operating screen.
2
3
.
145
Operation
4
5
, note the following:
MAN046939 Rev. 6-10.2021
6