ECOLAB EcoAdd Betriebsanleitung Seite 292

Control/software
[Selecting/setting Operating mode] [Timer] [Interval programme]
2
10
16
Fig. 36: Operating mode: [Timer] [Interval programme]
1.
[Call the main menu]:
2.
[Select Timer] - [Interval programme].
3.
[Press the Next] button
ð Screen change to the selection of the timer interval (interval programme)
4.
[Select Interval programme].
ð The screen changes to the setting: 'Interval programme' - 'Pulse duty factor'
5.
Use the slider to set the time/hours.
6.
Select time/minutes.
7.
Use the slider to set the time/minutes.
8.
[Press the Next] button
ð The screen changes to the setting: 'Interruption duration'
9.
Use the slider to set the minutes.
10. Select seconds.
11. Use the slider to set the seconds.
12. [Press the Next] button
ð The screen changes to the setting: 'Start state'
13. If required, select 'Start condition OFF'
14. [Press the Next] button
ð The screen changes to the setting: 'Power'
15. Use the slider to set the litres.
16. Select the ml range.
17. Use the slider to set the ml.
18. Pressing the
'Operating mode' .
19. Press the
20. Press the
MAN046939 Rev. 6-10.2021
5
3
4
13
11
12
19
17
18
Ä Chapter 8.5 'Main menu' on page 63
.
.
.
.
button saves the settings and returns to the selection of the
button to return to the 'Main menu' .
button to return to the [Operating display].
88
6 8
15
14
9
7