ECOLAB EcoAdd Betriebsanleitung Seite 311

8.8.11 Service interval
Here you can select the time after which a request to carry out maintenance is to be
shown in the display.
NOTICE!
When a dosing chemical is selected from the database, the corresponding
service interval is set automatically based on a durability check of the pump
materials stored together with the chemicals. When a custom dosing chemical
is defined or set, the durability must be checked using the pump materials
specified on the pump info screen and the corresponding service interval must
be set.
Fig. 56: Configuration: [Service interval]
Factory setting: No service
[Select Service interval]:
1.
[Call the main menu]:
2.
[Select Configuration]:
3.
Use the scrollbar to go to the [Service interval] menu item.
4.
[Select Service interval].
5.
Select the required interval:
The following intervals can be set:
n No service
13 weeks = quarterly
n
n 26 weeks = semi-annually
n 52 weeks = annually
n variable = any setting
Ä '[Selecting/setting the Service interval] - [Variable]' on page 108
6.
Press the
7.
Press the
4
3
Ä Chapter 8.5 'Main menu' on page 63
Ä Chapter 8.8 'Configuration' on page 89
button to return to the [Main menu].
button to return to the [Operating display].
107
6
5
MAN046939 Rev. 6-10.2021
Control/software