IndraWorks 15VRS Feldbusse
6.3
Profinet IO, Grundlagen
6.3.1
Begriffe und Abkürzungen
●
Profinet IO Device-bezogener Verbindungsstatus in der Oberfläche
●
Diagnose des Profinet IO Device über FB
●
Shared Device
●
Unterstützte Protokolle:
–
RTC (real-time cyclic) Class 1
–
RTC (real-time cyclic) Class 3
–
RTA (real-time acyclic)
–
DCP (Discovery and Configuration)
–
CL-RPC (Connectionless Remote Procedure Call)
–
LLDP (Link Layer Discovery Protocol)
–
SNMP (Simple Network Management Protocol)
–
MRP-Client (Media Redundancy Protocol - Client)
Folgende Funktionalitäten sind für zukünftige Erweiterungen vorgesehen:
●
Alarme
Jedes konfigurierte Profinet IO Device benötigt 8,6 kB der persis‐
tenten Retain-Daten des IEC-Programms.
Hinweise zur Konfiguration siehe
teeditor" auf Seite
Funktion / Eigenschaft
Max. Anzahl an IO-Modulen
Max. Anzahl an Submodulen
Max. IO Verbindungen
Baudrate
Auto negotiation/ autocrossing
Min. Zykluszeit (RT / IRT ab
14V22)
Max. Anzahl zyklischer Ein‐
gangsdaten
Max. Anzahl zyklischer Aus‐
gangsdaten
Max. Telegrammdaten pro azy‐
klischem Telegramm
Identification & Maintenance
Tab. 6-2:
Technische Daten
Controller
Der Profinet IO Feldbus-Master wird Controller genannt.
Device
Die Profinet IO Feldbus-Slaves nennt man Devices.
Stationsname Das Kriterium zur Adressierung eines Devices ist der Device‐
name (=Stationsname).
Kap. "Profinet IO Device - Gerä‐
126.
Wert
128 Slots (richtungsunabhängig)
132 (4 Kopfstation + 1 pro IO Modul)
4
100 MBit/s
Ja
RT: 1 ms
IRT: 250 µs
1440 Byte
1440 Byte
8192 Byte
I&M 0-4
R911393282_Ausgabe 05 Bosch Rexroth AG
81/395
Profinet IO