Grundfos Control MPC Montage- Und Betriebsanleitung Seite 73

8.6.71 Functions, CU 352 (4.5)
Functions, CU 352
Description
Make the basic settings of CU 352 in this submenu.
CU 352 comes with most of these settings, or they are made at
startup and normally not to be changed.
The service language, British English, can be selected for service
purposes. If no buttons are touched for 15 minutes, the display
returns to the language selected at startup or to the language set in
Display language (4.5.1).
If the service language is selected, the symbol
right in the top line of all displays.
Setting range
• Activation of service language, British English.
• Re-activation of startup wizard. (After startup, the wizard is
inactive.)
• Selection of Display language.
• Selection of display units.
• Setting of Date and time.
• Selection of password for menu Operation and Settings.
• Setting of Ethernet communication.
• Setting of GENIbus number.
• Reading of Software status.
Related information
8.6.72 Display language (4.5.1)
8.6.72 Display language (4.5.1)
Display language
Description
Here you select the language for the CU 352 display.
Setting range
• English
• German
• Danish
• Spanish
• Finnish
is to the
• French
• Greek
• Italian
• Dutch
• Polish
• Portuguese
• Russian
• Swedish
• Chinese
• Korean
• Japanese
• Czech
• Turkish
• Hungarian
• Bulgarian
• Croatian
• Latvian
• Lithuanian
• Romania
• Slovak
• Slovenian
• Serbian Latin
• US English
• Indonesian
• Malay
• Estonian.
Setting via the operating panel
• Settings > Functions, CU 352 > Display language.
73