Grundfos Control MPC Montage- Und Betriebsanleitung Seite 29

8.5.3 Alarm log (3.2)
The alarm log can store up to 24 warnings and alarms.
Alarm log
Description
The display shows warnings and alarms.
For every warning or alarm, the following is shown:
• Whether it is a warning or an alarm
• Where the fault occurred: System, Pump 1, Pump 2, etc.
• In case of input-related faults, the input is shown.
• The cause of the fault and the alarm code in brackets, such as
"Water shortage (214)".
• When the fault occurred: Date and time.
• When the fault disappeared: Date and time. If the fault still
exists, date and time are shown as "--...--".
The most recent warning or alarm is shown at the top of the display.
8.5.4 Service contact information (3.3)
Service contact information
Description
The display shows the contact information of the installer if entered
during commissioning.
.
29