Werbung
EU Declaration of Incoporation in accordance with ISO/IEC 17050-1:2010
Model
Serial Number
Incorporation:
It is declared that the above products, for what is supplied, fulfil the following Directives as
Detailed Below:
I Machine Directive
2006/42/EC
II Low-voltage Directive
2014/35/EU
III EMC Directive 2014/30/EU
IV RoHS Directive
2011/65/EU
V WEEE Directive
2012/19/EU.
Reference to Harmonized
Standards Used:
UR3
UR3, UR5, UR10 with CB3 control box (UR3/CB3, UR5/CB3,
UR10/CB3)
Starting 20183000000 and higher --- Effective 1 January 2018
Universal Robots (UR3, UR5, and UR10) shall only be put into
service upon being integrated into a final complete machine
(robot system, cell or application), which conforms with the
provisions of the Machinery Directive and other applicable
Directives.
The following essential requirements have been fulfilled: 1.1.2,
1.1.3, 1.1.5, 1.2.1, 1.2.4.3, 1.2.6, 1.3.4, 1.3.8.1, 1.5.1, 1.5.2, 1.5.6,
1.5.10, 1.6.3, 1.7.2, 1.7.4, 4.1.2.3
It is declared that the relevant technical documentation has been
compiled in accordance with Part B of Annex VII of the Machinery
Directive.
Reference the LVD and the harmonized standards used below.
Reference the EMC Directive and the harmonized standards used
below.
Reference the RoHS Directive 2011/65/EU.
Reference the WEEE Directive 2012/19/EU.
(I) EN ISO 10218-1:2011 as applicable,(I) EN ISO 12100:2010
(I) EN ISO 13732-1:2008, (I) EN ISO 13849-1:2008 & 2015*
*Note: From the 2008 to the 2015 editions, there are no changes
relevant to our robots TUV Nord Certificate 4478014097602
(I) EN ISO 13849-2:2012, (I) EN ISO 13850:2015
(I) EN 1037:1995+A1:2008, (I) EN ISO 13850:2015
(II) EN 60320-1:2001/ A1:2007, (II) EN 60204-1:2006/ A1:2010
(II) EN 60529:1991/ A2:2013
(II) EN 60664-1:2007, (II) EN 60947-5-5:1997/ A11:2013
(II) EN 61000-6-2:2005, (II) EN 61140:2002/ A1:2006
(III)EN 61000-6-4:2007/ A1:2011, (III)EN 61131-2:2007
60
Benutzerhandbuch
Werbung
