Notes On Safety; About This Chapter; Intended Use - Aventics AV Systembeschreibung

80 AVENTICS | Bus Coupler AES/Valve Driver AV, CANopen | R412018137–BAL–001–AE

Notes on Safety

2 Notes on Safety
2.1

About this chapter

The product has been manufactured according to the accepted rules of current technology. Even so,
there is risk of injury and damage to equipment if the following chapter and safety instructions
of this documentation are not followed.
Read these instructions completely before working with the product.
Keep this documentation in a location where it is accessible to all users at all times.
Always include the documentation when you pass the product on to third parties.
2.2

Intended use

The AES series bus coupler and AV series valve drivers are electronic components developed for
use in the area of industrial automation technology.
The bus coupler connects I/O modules and valves to the CANopen fieldbus system. The bus coupler
may only be connected to valve drivers from AVENTICS and I/O modules from the AES series.
The valve system may also be used without pneumatic components as a stand-alone system.
The bus coupler may only be actuated via a programmable logic controller (PLC), a numerical
controller, an industrial PC, or comparable controllers in conjunction with a bus master interface
with the fieldbus protocol CANopen.
AV series valve drivers are the connecting link between the bus coupler and the valves. The valve
drivers receive electrical information from the bus coupler, which they forward to the valves in the
form of actuation voltage.
Bus couplers and valve drivers are for professional applications and not intended for private use.
Bus couplers and valve drivers may only be used in the industrial sector (class A). An individual
license must be obtained from the authorities or an inspection center for systems that are to be used
in a residential area (residential, business, and commercial areas). In Germany, these individual
licenses are issued by the Regulating Agency for Telecommunications and Post
(Regulierungsbehörde für Telekommunikation und Post, Reg TP).
Bus couplers and valve drivers may be used in safety-related control chains if the entire system
is geared toward this purpose.
Observe the documentation R412018148 if you use the valve system in safety-related control
chains.