Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.5
GREASING THE DRIVING SHAFT (Fig. 04-06)
The vehicle has a driving shaft provided with greasers. The greasing operation of the 3 places shown in figure
should be made every 2500 kms (every 1000 Km in case of continuous usage at high speed) or at least once
a year if the number of kilometers is lower.
Lubrication is recommended every time the motorbike is washed.
TYPES OF GREASE TO BE USED
■ AGIP GREASE 30
■ AGIP GR LP2
■ ESSO LADEX 2
■ MOBIL PLEX 48
■ SHELL RHODINA GRIS 2
■ SHELL SUPERGRIS EP 2
4.6
FRONT FORK OIL CHANGE
Change fork oil about every 15,000 km or at least once a year.
Amount of oil required: about 0,400 litres cartridge oil «WP suspension - REZ 71 (SAE 5)».
NOTE: For further details on the oil replacement procedure, refer to the fork section in Chapter 17.
4.7
GREASING
To grease:
■ steering bearings;
■ swinging arm bearings;
■ control rod joints;
■ side stand fittings;
■ Articulated joints and needle bearing - rear driving box.
Use: «Agip Grease 30».
04-06
21
Werbung
Kapitel
Inhaltsverzeichnis
