MOTO GUZZI V10 CENTAURO Werkstatt-Handbuch Seite 47

– Disconnect the radiator from the engine supports
unscrewing the two screws «A» from both sides
(Fig. 10-15).
– Disconnect the oil pipes with a hexagonal spanner
(Fig. 10-16).
– Remove the radiator together with supports and
pipes.
CAUTION
When reassembling, replace the aluminium
gaskets.
– Unscrew the 14 screws securing timing system
cover «A» - Fig. 10-17 and remove it.
– The timing marks are highlighted in Fig. 10-18.
Use this marks for valve timing when reassembling.
A
10-15
10-16
A
10-17
10-18
45