MOTO GUZZI V10 CENTAURO Werkstatt-Handbuch Seite 66

WEIGHT CHECK FOR CRANKSHAFT BALANCING
The connecting rods complete with screws must have a balanced weight.
There is a tolerance of 4 grams.
(See "Table of connecting rod weights" Pag. 61)
For a static balancing of the crankshaft, the pin must bear a weight of: 1,870 kg.
NOTE: When the CARRILLO rods are mounted, in order to set the static balance of the motor shaft
a weight of 1.6Kg. must be applied on the button of the crank.
Ø54.000 ÷ 54.019
Ø53.970 ÷ 53.951
*
Ø44.008 ÷ 44.020
Ø37.959 ÷ 37.975
38.969 ÷ 40.031
Ø38.000 ÷ 38.016
10-65
64