Replacing Bulbs (V10 Ventauro) - MOTO GUZZI V10 CENTAURO Werkstatt-Handbuch

21.4.2 REPLACING BULBS (V10 CENTAURO)
Headlight (Fig. 21-08)
To change the bulbs, unscrew the retaining screw «A» under the headlight unit; remove the light unit and remove
the lamp holder.
NOTE: When changing the headlight bulb (main/dipped beams) take care not to touch the glass part
of the bulb with the fingers.
Indicator lights (Fig. 21-08)
Unscrew the screws «B» that fasten the reflectors to the turn indicators, press the bulbs inwards by rotating them,
and extract them from the lamp-holders.
NOTE: Never tighten too much the screws fastening the reflectors, to avoid breaking them.
Revolution counter (Fig. 21-09)
■ Take off the screws «A»;
■ Take out the revolution counter container «B»;
■ Take out the lamp holder and replace the lamp.
Odometer (Fig. 21-09)
■ Dismantle the head lamp;
■ Take out the screw «C»;
■ Take out the reset pin «D»;
■ Take out the odometer container «E»;
■ Take out the lamp holder and replace the lamp.
Dashboard (Fig. 21-10 / 21-11)
■ Dismantle the head lamp;
■ Take out the three screws «A» which fasten the
lower cover «B»;
■ Take out the lower cover;
■ Take out the lamp holder and replace the lamp.
168
B
A
B
A
B
21-10
B
21-08
D
E
C
21-09
21-11