If the rear brake disk has been revised or replaced the "wobbling" should be checked; this check can be carried
out by means of a dial gauge and the maximum value should not exceed 0.2 mm.
If disk "wobbling" exceeds the indicated value, the fitting of the disk on the hub should be carefully checked and
the play of the wheel bearings.
FRONT BRAKE PUMP
Run 13
DAYTONA RS / SPORT 1100 I
160
Left side
Wheel axis
Vehicle axis
FRONT BRAKE PUMP
10
20-10
V10 CENTAURO
REAR BRAKE PUMP
Floating piston stroke= 15 max.
Caliper support axis
Flat disc
20-09
20-11
20-12