MOTO GUZZI V10 CENTAURO Werkstatt-Handbuch Seite 73

– Remove the head caps.
– Using the appropriate seal tool «A» - Fig. 11-03 cod. 30 92 73 00, loosen the central securing nuts on the cam
shaft pulleys.
– Using the appropriate seal tool «B» - Fig. 11-04 cod. 30 92 76 00, loosen the nut securing the pulleys on the
service shaft.
A
– The pulley drive gear on the cam shafts can be removed using the appropriate extractor tool cod. 30 94 83 00
«C» - Fig. 11-05 / 11-05/A.
– Loosen the belt stretcher «D» - Fig. 11-05 and remove the timing system command pulleys «E» - Fig. 11-06.
C
D
MULTIPLE EXTRACTOR COD. 30 94 83 00
1 Screw
2 Nut
3 Body
4 Screw TE M4x35
5 Screw TCEI M8x30
6 Screw TE M5x35
7 Nut M5
8 Nut M4
B
11-03
11-05
oil pump command gear
5
4
3
2
1
E
Ø40
pulley services shaft
11-04
11-06
6
7
8
11-05/A
71