MOTO GUZZI V10 CENTAURO Werkstatt-Handbuch Seite 76

NOTE: When reassembling reinsert the caps of the valves («A» - Fig. 11-15).
A
– Remove the 4 OR rings on the cylinder seal stud bolts (Fig. 11-16).
– Extract the head, the gasket between the head and the cylinder, and the cylinder (Fig. 11-17).
– Remove the gudgeon pin catches, the gudgeon pin and the piston (Fig. 11-18). When reassembling,
remember that the arrow on the piston head must be turned towards the discharge (Fig. 11-19).
74
C
B
F
11-16
11-18
B
E
C
D
A
11-15
11-17
11-19