MOTO GUZZI V10 CENTAURO Werkstatt-Handbuch Seite 78

Before removing the oil sump the oil filter can be
removed in this way:
– Unscrew the external cap «A» - Fig. 11-24 with the
special tool (Cod. 01 92 91 00).
– With the other end if the same tool unscrew the
filter. Using the same tool assembly upside down
unscrew and extract the filter Fig.11-25.
WARNING
Pay attention positioning the OR when
reassembling the external oil cap «A» - Fig.11-24
Replace the OR if damaged.
– Unscrew the 14 peripheral sealing screws «A» of
the oil sump (Fig. 11-25). then disassemble it.
– Disassemble the oil filter support «C» - Fig.11-26.
Unscrewing the fixing bolts «D» - Fig. 11-26. And
removing it the oil pipes «E» - Fig. 11-26.
– Unscrew the bolts «F» - Fig.11-26 and remove the
flange «G» - Fig. 11-26 and Fig. 11-27.
76
E
C
D
E
C
A
11-24
A
11-25
D
F
G
11-26
G
11-27