MOTO GUZZI V10 CENTAURO Werkstatt-Handbuch Seite 81

Timing cover securing screws
Replace the timing cover securing screws positioning them according to the lengths indicated in the Fig. 11-34.
– Before inserting the pistons in the cylinders, position the rings as indicated in the Fig. 11-35.
35 mm
25 mm
– When replacing the cylinder head, take care to
position the gaskets correctly to avoid blocking the
oil passages shown in the Fig. 11-36; fit the two
cylinder head centering bushings.
– Before replacing the rocker arm support frame, fit
the 4 OR rings on the tie rods as indicated in the
Fig. 11-37.
IMPORTANT
When reassembling always reinsert new OR rings.
20 mm
35 mm
11-34 11-35
11-36
11-37
79