MOTO GUZZI V10 CENTAURO Werkstatt-Handbuch Seite 55

– Before refitting the rocker arms mount, slip the
4 oil seals «A» into their seats on the stud bolts
(Fig. 10-46).
WARNING
Always replace the OR with new ones.
– Tighten the 5 nuts and the central stud securing
head to cylinder in a cross sequence at 4÷4.2 Kgm
torque (Fig. 10-47).
– Before refitting the oil sump, accurately position
gasket «A» - Fig. 10-48.
WARNING
If gasket is installed incorrectly (both on sump
and on spacer), this will lead to immediate damage
to engine.
To check the setting of oil pressure relief valve «B»
- Fig. 10-48, see page 66.
Strainer «C» - Fig. 10-48 and oil ducts should be
cleaned accurately.
IMPORTANT
Always replace the gaskets oil sump and flange.
A
B
C
10-46
10-47
A
10-48
53