MOTO GUZZI V10 CENTAURO Werkstatt-Handbuch Seite 45

– Remove the two 2 screws «A» and draw our the
shafts of rocker arms «B» easing them out with a
screwdriver (Fig. 10-04 and 10-05).
– Disconnect oil delivery piping «A» - Fig. 10-06 to
heads; loosen screw cap «B» - Fig. 10-06 and the
underlying stud nut and the 5 nuts «C» - Fig. 10-06;
remove the rocker arm support «D» - Fig. 10-06.
– Move the head slightly apart from the cylinder,
remove the 4 oil seals «A» and pull the head out
(Fig. 10-07).
– Remove gasket «B» between head and cylinder,
and draw out the cylinder (Fig. 10-08 / 10-09 and
10-10).
B
A
10-05
A
10-07
10-09
A
10-06
A
10-04
B
B
C
D
C
B
10-08
10-10
43