MOTO GUZZI V10 CENTAURO Werkstatt-Handbuch Seite 129

Main shaft disassembly (Fig.14-13)
Using the correct punch press stopping pawl «A»
completely down, and rotate bushing «B» so that it
disengages from the splines.
Extract the bushing, remove the pawl, spring, roller
cage and 5th speed gear; with the correct extractor,
code 14 92 85 00 («A» - Fig. 14-14) slide out the
internal track of the needle bearings.
A
B
MAIN SHAFT
14-13
A
14-14
14-15
127