Wheels; Front Wheel - MOTO GUZZI V10 CENTAURO Werkstatt-Handbuch

19

WHEELS

19.1

FRONT WHEEL

Front wheel removal (Fig. 19-01 / 19-02)
To remove the wheel proceed as follows:
■ place a support under the bottom of the engine to raise the front wheel off the ground;
■ undo screws «A» that secure the brake calipers to the fork, and remove the calipers «B» together with their
hoses;
■ with the spanner code.01929300 unscrew the ring nut «C» that blocks the wheel stud.
■ loosen the screws «D» securing the sleeve to the pin;
■ sliding the stud «E» noting how the «F» spacer is assembled;
■ remove the wheel.
■ to reassemble follow the procedure in reverse order, taking care to maintain the correct position of the spacer;
then pull the brake lever repeatedly until the caliper pistons return to their normal position.
E
DAYTONA RS / SPORT 1100 I
DAYTONA RS / SPORT 1100 I
Tightening torque 2,8 ÷ 3 kgm
152
19-01
C
F
D
19-02
A
B
E
V10 CENTAURO
F
V10 CENTAURO
19-01
C
D
19-02
19-03