Tyres - MOTO GUZZI V10 CENTAURO Werkstatt-Handbuch

Tightening torque 12 kgm
REAR WHEEL 4,50 x 18 MT H2
19.3

TYRES

Tyres are among those machine components which require regular checking.
Machine stability, rider comfort and safety all depend on good tyre condition.
Do not use tyres with less than 2 mm of tread.
Incorrect tyre pressures can cause instability and excessive tyre wear.
Tyre pressures:
■ front wheel: with one or two riders 2.2 BAR;
■ rear wheel: with one rider 2.4 BAR; with two riders 2.6 BAR.
NOTE: These pressures are for normal touring use. For continuous high speed cruising (e.g. on
motorways) the above pressures should be increased by 0.1 BAR.
154
Ø143.9
143.8
Ø54.830
0.05 B
54.800
Ø55.030
55.000
Tightening torque 2,8 ÷ 3 kgm
0.1 AB
0.1 AB
19-06
19-07