Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 526

®
R&S Scope Rider RTH
DISPlay:PERSistence:TIME <PersistenceTime>
Sets a user-defined persistence time. The command takes effect if
PERSistence[:TYPE]
Parameter:
<PersistenceTime>
DISPlay:CONTrast <ContrastMode>
If enabled, the waveforms are displayed in black color on a white background.
Parameter:
<ContrastMode>
DISPlay:MOUS <EnableTouch>
Switches the touch functionality of the screen on or off.
If you use the instrument in an environment with immissions considerably higher than
specified, the immissions can affect the touch sensitivity of the screen. In this case,
disable the touch and operate the instrument using the keys and the wheel.
Parameter:
<EnableTouch>
DISPlay:LCD <EnableLCD>
Turns the LCD display on or off.
Parameter:
<EnableLCD>
Benutzerhandbuch 1326.1578.03 ─ 19
INF
Data points remain on the screen infinitely until persistence is
set to OFF.
*RST: OFF
is set to TIMe.
Bereich: 0.05 bis 10
Inkrement: 0.01
*RST: 0.05
Std.-einheit: s
ON | OFF
*RST: OFF
ON | OFF
*RST: OFF
ON | OFF
*RST: OFF
Fernsteuerbefehle
Allgemeine Geräteeinstellungen
DISPlay:
526