Herunterladen Diese Seite drucken

Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 493

Handheld-oszilloskop
Vorschau ausblenden Andere Handbücher für Scope Rider RTH:
®
R&S
Scope Rider RTH
BUS:LIN:FCOunt?
BUS:LIN:FRAMe<m>:BYTE<n>:STATe?
BUS:LIN:FRAMe<m>:BYTE<n>:VALue?
BUS:LIN:FRAMe<m>:CSSTate?
BUS:LIN:FRAMe<m>:CSValue?
BUS:LIN:FRAMe<m>:DATA?
BUS:LIN:FRAMe<m>:IDPValue?
BUS:LIN:FRAMe<m>:IDSTate?
BUS:LIN:FRAMe<m>:IDValue?
BUS:LIN:FRAMe<m>:STARt?
BUS:LIN:FRAMe<m>:STOP?
BUS:LIN:FRAMe<m>:STATus?
BUS:LIN:FRAMe<m>:SYMBol?
BUS:LIN:FRAMe<m>:SYSTate?
BUS:LIN:FCOunt?
Returns the number of decoded frames in the acquisition.
Rückgabewerte:
<Count>
Verwendung:
BUS:LIN:FRAMe<m>:BYTE<n>:STATe?
Returns the state of the specified byte.
Suffix:
<m>
<n>
Rückgabewerte:
<ByteState>
Verwendung:
BUS:LIN:FRAMe<m>:BYTE<n>:VALue?
Returns the value of the specified byte.
Benutzerhandbuch 1326.1578.03 ─ 19
..........................................................................................................493
.......................................................................... 493
.......................................................................... 493
......................................................................................494
...................................................................................... 494
.......................................................................................... 494
..................................................................................... 495
....................................................................................... 495
....................................................................................... 495
......................................................................................... 496
..........................................................................................496
....................................................................................... 496
.......................................................................................496
...................................................................................... 497
Bereich:
0 bis 100000
Inkrement: 1
*RST:
0
Nur Abfrage
.
*
*
OK | STERror | SPERror | UVAL | NOEXists | INSufficient
STERror: start error
SPERror: stop error
UVAL: unexpected value
NOEXists: byte does not exist
INSufficient: the frame is not completely contained in the acqui-
sition. The decoded part of the frame is valid.
*RST:
OK
Nur Abfrage
Fernsteuerbefehle
Protokollanalyse
493

Kapitel

loading