Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 520

®
R&S Scope Rider RTH
Beispiel:
Verwendung:
MMEMory:RCL <FileDestination>
Restores the instrument settings from the specified file.
Parameter:
<FileDestination>
Beispiel:
Verwendung:
MMEMory:DATA <FileName>,<Data>
Writes data to the specified file in the current directory (MMEMory:CDIRectory), or
reads the data.
Parameter:
<Data>
Einstell- und Abfrageparameter:
<FileName>
Beispiel:
MMEMory:CDIRectory <DirectoryName>
Specifies the current directory for file access.
Einstellparameter:
<DirectoryName>
Beispiel:
Benutzerhandbuch 1326.1578.03 ─ 19
MMEM:SAV
"/media/SD/Rohde-Schwarz/RTH/SaveSets/SetupMeasA.dfl"
Saves the current instrument settings to the file
SetupMeasA.dfl located in the directory /media/SD/
Rohde-Schwarz/RTH/SaveSets/ on the microSD card.
Ereignis
String parameter specifying path and filename of the settings
file. Wildcards are not allowed.
MMEM:RCL
"/media/SD/Rohde-Schwarz/RTH/SaveSets/SetupMeasA.dfl"
Loads and activates the instrument settings from the file
SetupMeasA.dfl located in the directory /media/SD/
Rohde-Schwarz/RTH/SaveSets/ on the microSD card.
Ereignis
488.2 block data
The block begins with the character '#'. The next digit is the
length of the length information. Then the length information
digits provide the number of bytes in the binary data.
String parameter containing the file name
MMEM:DATA "abc.txt", #216This is the file
#2: the length information has two digits.
16: the binary data has 16 bytes.
MMEM:DATA? "abc.txt"
received: #216This is the file
String parameter to specify the directory.
MMEM:CDIR "/media/USB1/Data";*OPC
Fernsteuerbefehle
Ergebnisse dokumentieren
520