Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 406

®
R&S Scope Rider RTH
Parameter:
<Range>
METer:SENSe:VOLTage:AC:RANGe:UPPer <Range>
METer:SENSe:VOLTage:DC:RANGe:UPPer <Range>
Sets a fixed voltage range and turns off autoranging.
Parameter:
<Range>
15.7.2.3 METer:SENSe:<Funktion>:RANGe:AUTO-Befehle
Mit METer:SENSe:<function>:RANGe:AUTO-Befehlen wird die automatische
Bereichseinstellung aktiviert oder deaktiviert. Für einige Messungen können Sie auch
die METer:CONFigure:<function>-Befehle verwenden (siehe
„METer:CONFigure-Befehle",
METer:SENSe:CAPacitance:RANGe:AUTO
METer:SENSe:CURRent:AC:RANGe:AUTO
METer:SENSe:CURRent:DC:RANGe:AUTO
METer:SENSe:FREQuency:VOLTage:RANGe:AUTO
METer:SENSe:RESistance:RANGe:AUTO
METer:SENSe:VOLTage:AC:RANGe:AUTO
METer:SENSe:VOLTage:DC:RANGe:AUTO
METer:SENSe:CAPacitance:RANGe:AUTO <State>
METer:SENSe:CURRent:AC:RANGe:AUTO <State>
METer:SENSe:CURRent:DC:RANGe:AUTO <State>
METer:SENSe:FREQuency:VOLTage:RANGe:AUTO <State>
METer:SENSe:RESistance:RANGe:AUTO <State>
Benutzerhandbuch 1326.1578.03 ─ 19
<numeric value> | MIN | MAX | DEF
<numeric value>
The instrument has fixed measurement ranges: 1 kΩ|10 kΩ|
100 kΩ|1 MΩ|10 MΩ|100 MΩ.
You can enter any value between the minimum and maximum
value. The instrument sets the next suitable range.
Bereich: 1 kOhm bis 100 MOhm
*RST: 1 kOhm
<numeric value> | MIN | MAX | DEF
<numeric value>
The instrument has fixed measurement ranges: 1 V|10 V|100 V|
1000 V.
You can enter any value between the minimum and maximum
value. The instrument uses the next suitable range.
Bereich: 1 bis 1000
*RST: 1
Std.-einheit: V
auf Seite 402).
......................................................................406
..................................................................... 406
..................................................................... 406
........................................................................406
......................................................................407
......................................................................407
Fernsteuerbefehle
Digitalmultimeter (R&S RTH1002)
Kapitel 15.7.2.1,
.........................................................406
406