Math-Einstellungen - Rohde & Schwarz Scope Rider Rth Benutzerhandbuch

®
R&S Scope Rider RTH
CURSor:MEASurement<m>:RESult:ACTual?
Returns the result of the indicated cursor measurement.
Suffix:
<m>
Rückgabewerte:
<Result>
Verwendung:
CURSor:MEASurement<m>:RESult:LIMit?
Indicates whether the measurement results are inside the measurement range, or out-
side (clipping).
Suffix:
<m>
Rückgabewerte:
<ResultLimit>
Verwendung:
15.4.4 Mathematikkurven
15.4.4.1

Math-Einstellungen

CALCulate:MATH:STATe
CALCulate:MATH[:EXPRession][:DEFine]
CALCulate:MATH:VERTical:SCALe
CALCulate:MATH:VERTical:RANGe
CALCulate:MATH:VERTical:POSition
CALCulate:MATH:STATe <State>
Enables or disables the math channel.
Parameter:
<State>
Benutzerhandbuch 1326.1578.03 ─ 19
.
1..2
Defines the measurement index. Two simultaneous cursor mea-
surements can be performed.
Bereich: -100E+24 bis 100E+24
Inkrement: 100E-12
*RST: 0
Nur Abfrage
.
1..2
Defines the measurement index. Two simultaneous cursor mea-
surements can be performed.
INSide | OVERflow | UNDerflow | OVUNflow
*RST: INSide
Nur Abfrage
.................................................................................................364
........................................................................ 365
................................................................................. 365
................................................................................ 365
...............................................................................365
ON | OFF
Fernsteuerbefehle
Messkurvenanalyse
364