Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 371

®
R&S Scope Rider RTH
MASK:CHANnel<m>:STATe
MASK:CHANnel<m>:PROPerties:XWIDth
MASK:CHANnel<m>:PROPerties:YWIDth
MASK:CHANnel<m>:CREatemask
MASK:CHANnel<m>:STATe <State>
Turns the selected mask on or off.
Suffix:
<m>
Parameter:
<State>
MASK:CHANnel<m>:PROPerties:XWIDth <WidthX>
Changes the width of the selected mask in horizontal direction.
Suffix:
<m>
Parameter:
<WidthX>
MASK:CHANnel<m>:PROPerties:YWIDth <WidthY>
Changes the width of the selected mask in vertical direction.
Suffix:
<m>
Parameter:
<WidthY>
MASK:CHANnel<m>:CREatemask
Creates a mask from the envelope waveform of the selected waveform with the defi-
ned width in x and y direction.
Suffix:
<m>
Verwendung:
Benutzerhandbuch 1326.1578.03 ─ 19
............................................................................................ 371
........................................................................ 371
........................................................................ 371
.................................................................................. 371
.
1|2|5 (RTH1002) , 1..5 (RTH1004)
ON | OFF
*RST: OFF
.
1|2|5 (RTH1002) , 1..5 (RTH1004)
Bereich: 0 bis 10
Inkrement: 0.01
*RST: 0.05
Std.-einheit: div
.
1|2|5 (RTH1002) , 1..5 (RTH1004)
Bereich: 0 bis 8
Inkrement: 0.01
*RST: 0.1
Std.-einheit: div
.
1|2|5 (RTH1002) , 1..5 (RTH1004)
Ereignis
Fernsteuerbefehle
Maskentests
371