Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 332

®
R&S Scope Rider RTH
● Timeout-Trigger (R&S
● Intervalltrigger (R&S
● Fenstertrigger (R&S
15.3.5.1 Allgemeine Triggereinstellungen
Siehe auch:
TRIGger:MODE
TRIGger:SOURce
TRIGger:TYPE
TRIGger:LEVel<m>:VALue
TRIGger:HOLDoff:MODE
TRIGger:HOLDoff:TIME
TRIGger:HOLDoff:EVENts
TRIGger:HOLDoff:MIN
TRIGger:HOLDoff:MAX
TRIGger:MNR
TRIGger:MODE <Mode>
The trigger mode determines the behavior of the instrument if no trigger occurs, and
also the number of acquired waveforms when a trigger occurs.
Parameter:
<Mode>
TRIGger:SOURce <Source>
Selects the trigger source, the waveform on which the trigger condition is checked.
Parameter:
<Source>
Benutzerhandbuch 1326.1578.03 ─ 19
RTH-K19).......................................................................... 352
RTH-K19).............................................................................352
RTH-K19)............................................................................. 354
Kapitel 3.6.1, „Allgemeine
............................................................................................................. 332
.......................................................................................................... 332
.............................................................................................................. 333
..............................................................................................333
................................................................................................333
..................................................................................................334
.............................................................................................. 334
....................................................................................................334
.................................................................................................. 334
................................................................................................................334
AUTO | NORMal | SINGle
AUTO
The instrument triggers repeatedly after a time interval if the trig-
ger conditions are not fulfilled. If a real trigger occurs, it takes
precedence.
NORMal
The instrument acquires waveforms continuously, each time
when a trigger occurs.
SINGle
When a trigger occurs, the instrument acquires one waveform.
*RST:
C1 | C2 | C3 | C4 | D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7
Logic channels D0 to D7 require option R&S RTH-B1. For video,
runt, slew rate and window trigger, only analog channels are
available.
*RST:
Triggereinstellungen",
AUTO
C1
Fernsteuerbefehle
Einrichten von Messkurven
auf Seite 57
332