Harmonic:scale; Harmonic:thdtype; Harmonic:statistic; Harmonischen-Ergebnisse Abrufen Und Exportieren - Rohde & Schwarz Scope Rider Rth Benutzerhandbuch

®
R&S Scope Rider RTH
HARMonic:SCALe <Unit>
Switches the scale for the measured harmonic levels between logarithmic (dB) and
linear (percent). The values are relative to the level measured for the fundamental fre-
quency, or to the level measured for the entire signal, depending on the selected THD
type (see
Parameter:
<Unit>
HARMonic:STATistic <Type>
By default, the numeric results indicate the currently measured values. Optionally, you
can switch to the minimum or maximum values.
Parameter:
<Type>
HARMonic:THDType <THDType>
Parameter:
<THDType>
15.6.3.2

Harmonischen-Ergebnisse abrufen und exportieren

Sie können die Harmonischen-Ergebnisse in eine Datei exportieren, ähnlich wie Mess-
kurven (siehe
HARMonic:EXPort:NAME
HARMonic:EXPort:SAVE
HARMonic:RESult<m>:CLIPping?
HARMonic:RESult<m>:FRQMissing?
HARMonic:RESult<m>:FUNDamental?
HARMonic:RESult<m>:HARMonics<n>:ABSMagnitude:MAXimum?
HARMonic:RESult<m>:HARMonics<n>:ABSMagnitude:MINimum?
HARMonic:RESult<m>:HARMonics<n>:ABSMagnitude[:CURRent]?
HARMonic:RESult<m>:HARMonics<n>:LIMCheck?
HARMonic:RESult<m>:HARMonics<n>:LIMit?
HARMonic:RESult<m>:HARMonics<n>:LIMViolation?
HARMonic:RESult<m>:HARMonics<n>:PHASe?
Benutzerhandbuch 1326.1578.03 ─ 19

HARMonic:THDType

PERCent | DB
*RST:
CURRent | MIN | MAX
*RST:
THDF | THDR
THDF
The RMS amplitude (voltage or current) of the harmonics rela-
tive to the RMS amplitude of the fundamental component
THDR
The RMS amplitude of the harmonics relative to the RMS ampli-
tude of the input signal
*RST:
Kapitel 15.13, „Ergebnisse
............................................................................................... 394
................................................................................................ 394
................................................................................... 394
auf Seite 393).
DB
CURRent
THDF
dokumentieren",
...............................................................................395
............................................................................ 395
.......................................................... 396
.................................................................. 396
....................................................... 397
.............................................................. 398
Fernsteuerbefehle
Spektrumanalyse
auf Seite 512).
....................................395
.....................................395
...................................395
393