Trigger:runt:range; Trigger:runt:width; Trigger:runt:delta; Trigger:runt:minwidth - Rohde & Schwarz Scope Rider Rth Benutzerhandbuch

®
R&S Scope Rider RTH
TRIGger:RUNT:RANGe <Condition>
Defines an additional time limit of the runt pulse.
Parameter:
<Condition>
TRIGger:RUNT:WIDTh <Duration>
Sets the width for comparison ranges EQUal, UNEQual, SHORter, and LONGer.
See TRIGger:WIDTh:RANGe.
Parameter:
<Duration>
TRIGger:RUNT:DELTa <Tolerance>
Sets a range Δt to the specified width, which is defined using TRIGger:RUNT:WIDTh.
Parameter:
<Tolerance>
TRIGger:RUNT:MINWidth <MinDuration>
Sets the lower time limit of the runt for comparisons WITHin and OUTSide.
Benutzerhandbuch 1326.1578.03 ─ 19
ANY | LONGer | SHORter | EQUal | NEQual | WITHin | OUTSide
ANY
Triggers on all runts fulfilling the level condition, without time
limitation.
LONGer | SHORter
Defines a minimum time during which the signals match the pat-
tern definition.
EQUal | NEQual
Triggers on pulses equal or not equal a given runt width that is
set using TRIGger:RUNT:WIDTh. In addition, a tolerance can
be set around the specified width using
.
WITHin | OUTSide
Triggers on pulses inside or outside a given range.
*RST: LONGer
Bereich: 800E-12 bis 10000
Inkrement: 100E-9
*RST: 5E-9
Std.-einheit: s
Bereich: 0 bis 5000
Inkrement: 500E-12
*RST: 0
Std.-einheit: s
Fernsteuerbefehle
Einrichten von Messkurven

TRIGger:RUNT:DELTa

346