Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 463

®
R&S Scope Rider RTH
TRIGger:SPI:DATA <Pattern>
Specifies the data pattern to be found on the specified line, in binary format. Enter the
words in MSB first bit order.
Parameter:
<Pattern>
Beispiel:
TRIGger:SPI:DCONdition <Relation>
Defines how the specified data pattern is compared with the acquired signal. The
instrument triggers if the acquired data is equal or unequal to the pattern.
Parameter:
<Relation>
TRIGger:SPI:DPOSition <BitOffset>
Sets the number of bits before the first bit of the pattern. These bits are ignored. The
first bit after CS or timeout is bit 0.
Parameter:
<BitOffset>
15.11.3.3 SPI-Decodierungsergebnisse
Das Framesuffix <m> gibt den Frameindex an, für den das Ergebnis abgefragt wird.
Das Bytesuffix <n> gibt den Byteindex an, für den das Ergebnis abgefragt wird.
BUS:SPI:FCOunt?
BUS:SPI:FRAMe<m>:DATA?
BUS:SPI:FRAMe<m>:STATus?
BUS:SPI:FRAMe<m>:STARt?
BUS:SPI:FRAMe<m>:STOP?
BUS:SPI:FRAMe<m>:WCOunt?
BUS:SPI:FRAMe<m>:WORD<n>:MISO?
BUS:SPI:FRAMe<m>:WORD<n>:MOSI?
BUS:SPI:FRAMe<m>:WORD<n>:STARt?
BUS:SPI:FRAMe<m>:WORD<n>:STOP?
Benutzerhandbuch 1326.1578.03 ─ 19
String with max. 32 bit in binary format. Characters 0, 1, and X
are allowed.
TRIGger:SPI:DATA '111000'
TRIGger:SPI:DATA?
<--111000
Specifies a 6 bit pattern. Higher bits are omitted.
EQUal | NEQual
*RST: EQUal
Bereich: 0 bis 4095
Inkrement: 1
*RST: 0
......................................................................................................... 464
.......................................................................................... 464
....................................................................................... 464
......................................................................................... 464
..........................................................................................465
...................................................................................... 465
......................................................................... 465
......................................................................... 466
........................................................................ 466
......................................................................... 466
Fernsteuerbefehle
Protokollanalyse
463