Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 340

®
R&S Scope Rider RTH
Parameter:
<LineField>
TRIGger:TV:CUSTom:STYPe <SyncPulseType>
Sets the type of the sync pulse, either bi-level sync pulse (usually used in SDTV sig-
nals), or tri-level sync pulse (used in HDTV signals).
Parameter:
<SyncPulseType>
TRIGger:TV:CUSTom:LDURation <LineDuration>
Sets the duration of a single video line, the time between two successive sync pulses.
Parameter:
<LineDuration>
TRIGger:TV:CUSTom:SDURation <SyncPulseDuration>
Sets the width of the sync pulse.
Parameter:
<SyncPulseDuration> Bereich:
TRIGger:TV:CUSTom:SCANmode <ScanMode>
Sets the scanning system.
For details, see
Parameter:
<ScanMode>
15.3.5.6 Externer Trigger (R&S RTH1002)
TRIGger:EXTernal:LEVel
TRIGger:EXTernal:SLOPe
Benutzerhandbuch 1326.1578.03 ─ 19
FIELD1 | FIELD2
*RST: FIELD1
BILevel | TRILevel
*RST: BILevel
Bereich: 5E-6 bis 200E-6
Inkrement: 100E-9
*RST: 64E-6
Std.-einheit: s
100E-9 bis 100E-6
Inkrement: 100E-9
*RST: 4.7E-6
Std.-einheit: s
„Scan" auf Seite 68.
INTerlaced | PROGressive | SEGMented
*RST: INTerlaced
................................................................................................ 341
.............................................................................................. 341
Fernsteuerbefehle
Einrichten von Messkurven
340