Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 367

®
R&S Scope Rider RTH
REFCurve:OPEN
Loads a stored reference waveform from the specified file. The file is specified using
REFCurve:NAME.
Verwendung:
REFCurve:DELete
Deletes a stored reference waveform file. The file is specified using REFCurve:NAME.
Verwendung:
15.4.6 History (Option R&S RTH-K15)
In CHANnell:HISTory-Befehlen ist das Kanalsuffix irrelevant und kann weggelassen
werden.
Siehe auch:
CHANnel<m>:HISTory[:STATe]
CHANnel<m>:HISTory:NSEGments
CHANnel<m>:HISTory:TPACq
ACQuire:AVAilable?
CHANnel<m>:HISTory:STARt
CHANnel<m>:HISTory:STOP
CHANnel<m>:HISTory:CURRent
CHANnel<m>:HISTory:PLAY
CHANnel<m>:HISTory:REPLay
CHANnel<m>:HISTory:TSABsolute?
CHANnel<m>:HISTory:TSDate?
CHANnel<m>:HISTory:TSRelative?
CHANnel<m>:HISTory[:STATe] <State>
Enables or disables the history function.
Suffix:
<m>
Parameter:
<State>
CHANnel<m>:HISTory:NSEGments <Depth>
Sets the approximate number of waveforms to be stored.
See also
Suffix:
<m>
Benutzerhandbuch 1326.1578.03 ─ 19
Ereignis
Ereignis
Kapitel 4.7, „History (Option R&S
........................................................................................367
.........................................................................................368
........................................................................................................368
..........................................................................................368
.......................................................................................... 368
..................................................................................... 369
...........................................................................................369
....................................................................................... 369
...................................................................................... 370
.
Suffix is irrelevant, omit it.
ON | OFF
*RST:
„Anzahl Segmente (Number of Segments)"
.
Suffix is irrelevant, omit it.
RTH-K15)",
................................................................................. 367
................................................................................ 370
................................................................................. 370
OFF
auf Seite 108.
Fernsteuerbefehle
Messkurvenanalyse
auf Seite 107
367