Trigger:level :Window:lower; Trigger:level :Window:upper - Rohde & Schwarz Scope Rider Rth Benutzerhandbuch

®
R&S Scope Rider RTH
Parameter:
<Tolerance>
TRIGger:INTerval:MINWidth <MinDuration>
Sets the lower time limit of the interval for comparisons WITHin and OUTSide.
Parameter:
<MinDuration>
TRIGger:INTerval:MAXWidth <MaxDuration>
Sets the upper time limit of the interval for comparisons WITHin and OUTSide.
Parameter:
<MaxDuration>
15.3.5.15 Fenstertrigger (R&S RTH-K19)
TRIGger:LEVel<m>:WINDow:LOWer
TRIGger:LEVel<m>:WINDow:UPPer
TRIGger:WINDow:TIME
TRIGger:WINDow:RANGe
TRIGger:WINDow:WIDTh
TRIGger:WINDow:DELTa
TRIGger:WINDow:MINWidth
TRIGger:WINDow:MAXWidth
TRIGger:LEVel<m>:WINDow:LOWer <Level>
TRIGger:LEVel<m>:WINDow:UPPer <Level>
Set the upper and lower voltage thresholds for the window trigger, respectively. The
trigger levels are the vertical window limits.
Suffix:
<m>
Benutzerhandbuch 1326.1578.03 ─ 19
Bereich: 0 bis 5000
Inkrement: 500E-12
*RST: 0
Std.-einheit: s
Bereich: 800E-12 bis 10000
Inkrement: 100E-9
*RST: 5E-9
Std.-einheit: s
Bereich: 800E-12 bis 10000
Inkrement: 100E-9
*RST: 5E-9
Std.-einheit: s
............................................................................... 354
................................................................................354
..................................................................................................355
.............................................................................................. 355
............................................................................................... 355
................................................................................................356
........................................................................................... 356
.......................................................................................... 356
.
1..4
Indicates the trigger source: analog channel 1 to 4
Fernsteuerbefehle
Einrichten von Messkurven
354