Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 427

®
R&S Scope Rider RTH
METer<m>:MEASure:CURRent:AC?
METer<m>:MEASure:CURRent:DC?
METer<m>:MEASure:VOLTage:AC?
METer<m>:MEASure:VOLTage:DC?
METer<m>:MEASure:CURRent:AC? [<ExpectedValue>]
METer<m>:MEASure:CURRent:DC? [<ExpectedValue>]
Configures the current measurement and returns the result.
Suffix:
<m>
Abfrageparameter:
[<ExpectedValue>]
Rückgabewerte:
<Result>
Verwendung:
METer<m>:MEASure:VOLTage:AC? [<ExpectedValue>]
METer<m>:MEASure:VOLTage:DC? [<ExpectedValue>]
Configures the voltage measurement and returns the result.
Suffix:
<m>
Abfrageparameter:
[<ExpectedValue>]
Rückgabewerte:
<Result>
Verwendung:
15.8.5.3 Statistik
Bevor Sie statistische Ergebnisse abrufen können, müssen Sie die Messung konfigu-
rieren und die durchzuführende Messung mit
len.
Benutzerhandbuch 1326.1578.03 ─ 19
................................................................................427
................................................................................427
................................................................................ 427
................................................................................ 427
.
1..4
Selects the voltmeter.
<numeric value> | MIN | MAX | DEF
Optional parameter, expected measurement result or range. The
instrument sets the appropriate measurement range.
See: METer<m>:CONFigure:CURRent:DC.
Numeric value
Nur Abfrage
.
1..4
Selects the voltmeter.
<numeric value> | MIN | MAX | DEF
Optional parameter, expected measurement result or range. The
instrument sets the appropriate measurement range.
See: METer<m>:CONFigure:VOLTage:DC.
Numeric value
Nur Abfrage
Fernsteuerbefehle
Voltmeter (R&S RTH1004)
METer<m>:SENSe:FUNCtion
auswäh-
427