Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 501

®
R&S Scope Rider RTH
15.11.7.2 SENT-Trigger
TRIGger:SENT:TYPE
TRIGger:SENT:DATA
TRIGger:SENT:DCONdition
TRIGger:SENT:ICONdition
TRIGger:SENT:IDENtifier
TRIGger:SENT:SCONdition
TRIGger:SENT:STATus
TRIGger:SENT:FCRCerror
TRIGger:SENT:IRFLength
TRIGger:SENT:PPERioderror
TRIGger:SENT:PULSeerror
TRIGger:SENT:SCRCerror
TRIGger:SENT:TYPE <TriggerType>
Sets the SENT trigger type.
Parameter:
<TriggerType>
TRIGger:SENT:DATA <Pattern>
Defines the data pattern as the trigger condition. Enter the words in MSB first bit order.
Parameter:
<Pattern>
TRIGger:SENT:DCONdition <Relation>
Defines how the specified data pattern is compared with the acquired signal. The
instrument triggers if the acquired address is equal or unequal the defined pattern.
Parameter:
<Relation>
Benutzerhandbuch 1326.1578.03 ─ 19
..................................................................................................... 501
......................................................................................................501
............................................................................................ 501
..............................................................................................502
................................................................................................502
.............................................................................................502
...................................................................................................502
.............................................................................................. 502
...............................................................................................503
..........................................................................................503
.............................................................................................503
..............................................................................................503
STOF | STAT | STDA | ID | IDDT | ERRC
STOF:
STAT: fast status
STDA: fast status and data
ID: slow Identifier
IDDT: slow Identifier and data
ERRC: error condition
*RST: STOF
String with max. 4 bytes in binary format. Characters 0, 1, and X
are allowed. If you define a pattern with incomplete byte, the
missing LSB are filled with X.
UNUSed | EQUal | NEQual | LTHan | LETHan | GTHan |
GETHan | INRange | OORange
*RST: EQUal
Fernsteuerbefehle
Protokollanalyse
501