Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 396

®
R&S Scope Rider RTH
Rückgabewerte:
<AbsMagnitude>
Verwendung:
HARMonic:RESult<m>:HARMonics<n>:LIMCheck?
Queries whether a limit is defined for the specified harmonic (either by the EN50160
standard or by a user-defined configuration file). Only if a limit value is defined, a limit
check is performed for the harmonic.
Suffix:
<m>
<n>
Rückgabewerte:
<State>
Beispiel:
Verwendung:
HARMonic:RESult<m>:HARMonics<n>:LIMit?
Queries the limit defined for the specified harmonic.
Note: Only if a limit value is defined, a limit check is performed for the harmonic (see
HARMonic:RESult<m>:HARMonics<n>:LIMCheck?
Suffix:
<m>
<n>
Rückgabewerte:
<Limit>
Benutzerhandbuch 1326.1578.03 ─ 19
Nur Abfrage
.
1|2 (RTH1002) , 1..4 (RTH1004)
1..64
Order of harmonic (possibly restricted, see
RESult<m>:NOHarmonics?).
ON | OFF
ON
A limit is specified and a limit check is performed.
OFF
No limit is specified, so no limit check is performed for the har-
monic.
HARM:LIM:TYPE EN50160
HARM:RES1:HARM2:LIMC?
//Result: 1
HARM:RES1:HARM2:LIM?
//Result: 2%
HARM:RES1:HARM2:LIMV?
//Result: 0
Nur Abfrage
.
1|2 (RTH1002) , 1..4 (RTH1004)
1..64
Order of harmonic (possibly restricted, see
RESult<m>:NOHarmonics?).
percentage
Fernsteuerbefehle
Spektrumanalyse
HARMonic:
auf Seite 396).
HARMonic:
396