Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 405

®
R&S Scope Rider RTH
Parameter:
<Range>
METer:SENSe:CURRent:AC:RANGe:UPPer <Range>
METer:SENSe:CURRent:DC:RANGe:UPPer <Range>
Sets a fixed current range and turns off autoranging.
Parameter:
<Range>
METer:SENSe:FREQuency:VOLTage:RANGe:UPPer <Range>
Sets a fixed voltage range for frequency measurements and turns off autoranging.
Parameter:
<Range>
METer:SENSe:RESistance:RANGe:UPPer <Range>
Sets a fixed range for resistance measurements and turns off autoranging.
Benutzerhandbuch 1326.1578.03 ─ 19
<numeric value> | MIN | MAX | DEF
<numeric value>
The instrument has fixed measurement ranges: 10 nF|100 nF|
1 μF|10 μF|100 μF|1 mF|10 mF.
You can enter any value between the minimum and maximum
value. The instrument uses the next suitable range.
Bereich: 10 nF bis 10 mF
*RST: 10 nF
<numeric value> | MIN | MAX | DEF
<numeric value>
The instrument has fixed measurement ranges: 1 A|10 A|100 A|
1000 A.
You can enter any value between the minimum and maximum
value. The instrument uses the next suitable range.
Bereich: 1 bis 1000
*RST: 1
Std.-einheit: A
<numeric value> | MIN | MAX | DEF
<numeric value>
The instrument has fixed measurement ranges: 1 V|10 V|100 V|
1 kV.
You can enter any value between the minimum and maximum
value. The instrument uses the next suitable range.
Bereich: 1 bis 1000
*RST: 1
Std.-einheit: V
Fernsteuerbefehle
Digitalmultimeter (R&S RTH1002)
405