®
R&S
Scope Rider RTH
TRIGger:WIDTh:WIDTh <Duration>
Sets the width for comparison ranges EQUal, UNEQual, SHORter, and LONGer.
See
Parameter:
<Duration>
TRIGger:WIDTh:DELTa <Tolerance>
Sets a range Δt to the specified width, which is defined using
.
Parameter:
<Tolerance>
TRIGger:WIDTh:MAX <MaxDuration>
Sets the upper limit for the pulse width if
OUTSide.
Parameter:
<MaxDuration>
TRIGger:WIDTh:MIN <MinDuration>
Sets the lower limit for the pulse width if
OUTSide.
Parameter:
<MinDuration>
Benutzerhandbuch 1326.1578.03 ─ 19
WITHin | OUTSide
Triggers on pulses inside or outside a given range. The range is
set using
*RST:
TRIGger:WIDTh:RANGe
Bereich:
Inkrement: 100E-9
*RST:
Std.-einheit: s
Bereich:
Inkrement: 500E-12
*RST:
Std.-einheit: s
Bereich:
Inkrement: 100E-9
*RST:
Std.-einheit: s
Bereich:
Inkrement: 100E-9
*RST:
Std.-einheit: s
TRIGger:WIDTh:MIN
LONGer
auf Seite 336
800E-12 bis 10000
5E-9
0 bis 5000
0
TRIGger:WIDTh:RANGe
800E-12 bis 10000
5E-9
TRIGger:WIDTh:RANGe
800E-12 bis 10000
5E-9
Fernsteuerbefehle
Einrichten von Messkurven
and TRIGger:WIDTh:MAX.
TRIGger:WIDTh:WIDTh
is set to WITHin or
is set to WITHin or
337