Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 334

®
R&S Scope Rider RTH
TRIGger:HOLDoff:TIME <Time>
Sets the time that has to pass at least until the next trigger occurs. The command
takes effect if
Parameter:
<Time>
TRIGger:HOLDoff:EVENts <Events>
Sets the number of triggers to be skipped until the next trigger occurs. The command
takes effect if
Parameter:
<Events>
TRIGger:HOLDoff:MIN <RandomMinTime>
TRIGger:HOLDoff:MAX <RandomMaxTime>
Set the time limits for random holdoff time. For each acquisition, the instrument selects
a new random holdoff time from the specified range.
Parameter:
<RandomMinTime>
<RandomMaxTime>
TRIGger:MNR <MoreNoiseReject>
Enables a hysteresis to avoid unwanted trigger events caused by noise oscillation
around the trigger level.
Benutzerhandbuch 1326.1578.03 ─ 19
RANDom
Defines the holdoff as a random time limited by
HOLDoff:MIN
tion, the instrument selects a new random holdoff time from the
specified range.
EVENts
Defines the holdoff as a number of trigger events, which is defi-
ned with TRIGger:HOLDoff:EVENts.
*RST: OFF
is set to TIME.
TRIGger:MODE
Bereich: 8E-9 bis 10
Inkrement: 200E-6
*RST: 1E-3
Std.-einheit: s
is set to EVENts.
TRIGger:MODE
Bereich: 1 bis 1000000000
Inkrement: 10
*RST: 1
Bereich: 8E-9 bis 10
Inkrement: 200E-6
*RST: 2E-3
Std.-einheit: s
Einrichten von Messkurven
and TRIGger:HOLDoff:MAX. For each acquisi-
Fernsteuerbefehle
TRIGger:
334