Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 414

®
R&S Scope Rider RTH
Verwendung:
15.7.5.2 METer:MEASure-Befehle
Einen METer:MEASure:<function>?-Befehl zu senden, ist dasselbe, wie den
Befehl METer:CONFigure:<function> und direkt danach einen READ?-Befehl zu
senden.
METer:MEASure:CONTinuity?
METer:MEASure:DIODe?
METer:MEASure:FREQuency?
METer:MEASure:TEMPerature?
METer:MEASure:CAPacitance?
METer:MEASure:CURRent:AC?
METer:MEASure:CURRent:DC?
METer:MEASure:RESistance?
METer:MEASure:VOLTage:AC?
METer:MEASure:VOLTage:DC?
METer:MEASure:CONTinuity?
METer:MEASure:DIODe?
METer:MEASure:FREQuency?
METer:MEASure:TEMPerature?
Configures the measurement and returns the result.
Rückgabewerte:
<Range>
Verwendung:
METer:MEASure:CAPacitance? [<ExpectedValue>]
Configures the capacitance measurement and returns the result.
Abfrageparameter:
[<ExpectedValue>]
Rückgabewerte:
<Result>
Verwendung:
METer:MEASure:CURRent:AC? [<ExpectedValue>]
METer:MEASure:CURRent:DC? [<ExpectedValue>]
Configures the current measurement and returns the result.
Benutzerhandbuch 1326.1578.03 ─ 19
Nur Abfrage
.........................................................................................414
................................................................................................414
........................................................................................414
...................................................................................... 414
.......................................................................................414
...................................................................................... 414
...................................................................................... 414
.........................................................................................415
.......................................................................................415
.......................................................................................415
Nur Abfrage
<numeric value> | MIN | MAX | DEF | 'AUTO'
Optional parameter, expected measurement result or range. The
instrument sets the appropriate measurement range.
See: METer:CONFigure:CAPacitance.
Numeric value
Nur Abfrage
Fernsteuerbefehle
Digitalmultimeter (R&S RTH1002)
414