Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 437

®
R&S Scope Rider RTH
LOGGer:SLOT:CURRent <SelectedSlot>
Selects one of the 10 memory slots to store the data during the logging. It is possible to
change the slot during recording. This command shows the slot number that is selec-
ted in the menu.
Parameter:
<SelectedSlot>
LOGGer:SLOT:SLOT<m>:NAME <Name>
Sets an optional slot name to describe the logged data.
Suffix:
<m>
Parameter:
<Name>
Firmware/Software: FW 1.60 and higher
LOGGer:SLOT:SLOT<m>:HASData?
Queries if the slot has data.
Suffix:
<m>
Rückgabewerte:
<HasData>
Verwendung:
Benutzerhandbuch 1326.1578.03 ─ 19
S1 | S2 | S4 | S5 | S10 | S20 | S40
Seconds per division
M1 | M2 | M4 | M5 | M10 | M20 | M40
Minutes per division
H1 | H2 | H4 | H5 | H10 | H20
Hours per division
D1 | D2 | D4
Days per division
*RST: AUTO
SLOT1 | SLOT2 | SLOT3 | SLOT4 | SLOT5 | SLOT6 | SLOT7 |
SLOT8 | SLOT9 | SLOT10
*RST: SLOT1
.
1..10
Slot number
String parameter, name of the slot. The maximum length of the
name is 20 characters.
.
1..10
Slot number
1 | 0
1: data available
0: slot is empty
*RST: 0
Nur Abfrage
Fernsteuerbefehle
Daten-Logger
437