Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 472

®
R&S Scope Rider RTH
Suffix:
<m>
Rückgabewerte:
<State>
Verwendung:
BUS:UART:WORD<m>:STARt?
Returns the start time of the specified symbol (word).
Suffix:
<m>
Rückgabewerte:
<StartTime>
Verwendung:
BUS:UART:WORD<m>:STOP?
Returns the end time of the specified symbol (word).
Suffix:
<m>
Rückgabewerte:
<StopTime>
Verwendung:
Benutzerhandbuch 1326.1578.03 ─ 19
.
*
Selects the word.
OK | BREak | STERror | SPERror | PRERror | INSufficient
OK: the frame is valid.
BREak: break condition found. A start bit is not followed by a
stop bit, and the data line remains at logic 0 for longer than a
UART word.
STERror: start error, no start bit found.
SPERror: stop error, no stop condition found.
PRERror: parity error, which indicates a transmission error.
INSufficient: the frame is not completely contained in the
acquisition. The acquired part of the frame is valid.
*RST: OK
Nur Abfrage
.
*
Selects the word.
Bereich: -100E+24 bis 100E+24
Inkrement: 100E-12
*RST: 0
Std.-einheit: s
Nur Abfrage
.
*
Selects the word.
Bereich: -100E+24 bis 100E+24
Inkrement: 100E-12
*RST: 0
Std.-einheit: s
Nur Abfrage
Fernsteuerbefehle
Protokollanalyse
472