Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 395

®
R&S Scope Rider RTH
Verwendung:
HARMonic:RESult<m>:FRQMissing?
Queries whether the fundamental frequency was detected in the input signal or not. If
the specified frequency ±10 % is not detected in the signal, the measurement is invalid.
Suffix:
<m>
Rückgabewerte:
<State>
Verwendung:
HARMonic:RESult<m>:FUNDamental?
Suffix:
<m>
Rückgabewerte:
<Frequency>
Verwendung:
HARMonic:RESult<m>:HARMonics<n>:ABSMagnitude:MAXimum?
HARMonic:RESult<m>:HARMonics<n>:ABSMagnitude:MINimum?
HARMonic:RESult<m>:HARMonics<n>:ABSMagnitude[:CURRent]?
Returns the currently measured, minimum or maximum power level of the selected
harmonic.
Suffix:
<m>
<n>
Benutzerhandbuch 1326.1578.03 ─ 19
*RST: OFF
Nur Abfrage
.
1|2 (RTH1002) , 1..4 (RTH1004)
ON | OFF
OFF
The fundamental frequency was not detected, the measurement
is invalid. Define the correct frequency of the input signal.
ON
The fundamental frequency was detected, the measurement is
valid.
*RST: OFF
Nur Abfrage
.
1|2 (RTH1002) , 1..4 (RTH1004)
Bereich: 9 bis 1005
Inkrement: 10E-6
*RST: 0
Std.-einheit: Hz
Nur Abfrage
.
1|2 (RTH1002) , 1..4 (RTH1004)
1..64
Order of harmonic (possibly restricted, see
RESult<m>:NOHarmonics?).
Fernsteuerbefehle
Spektrumanalyse
HARMonic:
395